Three-Phase Load Balance Worksheet
Compare entered phase currents, identify the highest and lowest phase, and quantify the spread without asserting a compliance limit.
Inputs
View resultLive result
Edit inputsAverage
15.0A
Spread
6.0A
Highest phase
L1
Use comparable measurements taken under a documented operating condition. This worksheet does not set or apply an imbalance limit.
- Compare entered phase currents, identify the highest and lowest phase, and quantify the spread without asserting a compliance limit.
- What you get: Average current · phase spread · highest phase.
- Runs in your browser with no sign-up. Saving a result is optional. An estimate for guidance, not a certificate.
How it works
The worksheet averages the three entered currents and reports the spread between the highest and lowest phase. It deliberately does not invent or apply a permitted imbalance threshold.
Estimates only: for guidance, not a quote or a compliance certificate. Verify against the current AS/NZS standards and a licensed design. The maths runs in your browser. Nothing is sent to Wattbench unless you sign in and deliberately save the result.
Source ledger2 sources
Did this help you move the job forward?
More tools
Identification Tool
Single or Three-Phase Supply Check
Use visible main-switch or meter clues to identify a likely single- or three-phase supply without opening the switchboard.
Engineering Tool
Cable Sizing Calculator
Find the minimum conductor size that keeps a DC string or AC run under its voltage-drop limit, then round up to the next standard cable size, with the resulting drop shown.
Grid Worksheet
AC Voltage Rise Worksheet
Compare two entered voltage readings and document the rise in volts and percentage without applying a compliance verdict.